I have gotten a few questions on how to get a picture into your posts. So here is a short how-to on the WHiZZi-bang stuff with the BBCode. For a complete list of the codes and what they do go here
The easiest way, if you don't want to type in the code, is to use the handy-dandy little buttons so thoughtfully provided by the programmers.
I am going to put a pic here. You would click the IMG button and then put in the URL where the pic is located.
Then, and this is important, after the URL. (Apparently no spaces between the code and the URL is important too.)
The other important thing to note is that the picture has to be on a server that allows for direct linking.
Don't ask me what the "Code" "List" or "List=" buttons do.
And I can never get the signature thing to work for me.
How to post your picture and other neato stuph
Moderator: Moderators
- scottidog
- Silver Suit Afficianado
- Posts: 27353
- Joined: Fri Aug 09, 2002 2:50 am
- Location: Permanent state of Al Induced Haze, since 9/9/03.
- like_im_27again
- Obsessed
- Posts: 1867
- Joined: Sat Mar 15, 2003 12:25 am
- Location: Oceanside, CA
- Contact:
- WHiZZi
- Be jealous.
- Posts: 2270
- Joined: Wed Oct 31, 2001 2:00 am
- Location: Netherlands
- Contact:
Re: How to post your picture and other neato stuph
Geocities and Fortunecity don't allow that for your informationThe other important thing to note is that the picture has to be on a server that allows for direct linking.
Code-tag:Don't ask me what the "Code" "List" or "List=" buttons do.
CODE
<?php
function test_code()
{
echo "Some code examples";
return 0;
}
?>
List-tag
This
is
a
list
I disabled signatures. There are plenty of reasons why I disabled themAnd I can never get the signature thing to work for me.
- Elvis
- Be jealous.
- Posts: 16296
- Joined: Sat Nov 03, 2001 2:00 am
- Awards: Best Admin
- Location: Palace of Wisdom
- Contact:
Re: How to post your picture and other neato stuph
I am going to put a pic here. You would click the IMG button and then put in the URL where the pic is located. .... Then, and this is important, click the IMG button again after the URL.
It should look something like this when done.
CODE
[img]http://home.bendcable.com/bjordan735/clikhere.jpg[/img]
Only, maybe not green.
You could also type the URL where the picture is located, highlight the entire URL with your mouse, and click the IMG button. OR you could type the [img]and[/img] tags around your URL. Do whichever way is easier for you, they all produce the same results.
Dave
- WHiZZi
- Be jealous.
- Posts: 2270
- Joined: Wed Oct 31, 2001 2:00 am
- Location: Netherlands
- Contact: